|
|
|
|
|
|
HI-LIFT HK HANDLE KEEPER
|
|
List Price: $19.99
Our Price: $11.99
Savings: $8.00
|
|
|
A must-have item for Hi-Lift Jack owners! The rugged polyurethane Hi-Lift Handle Keeper firmly holds the Hi-Lift Jack handle to the upright steel I-beam of the jack, keeping the handle in place when not in use and eliminating rattling during transportation and storage. Hi-Lift’s unique design allows the Handle Keeper to be slipped on or off the jack without having to remove the Top Clamp/Clevis! Available in Black and Red.
|
|
|
|
|
|
|
|
|
|
HI-LIFT FK-1 FIX IT KIT
|
|
List Price: $19.99
Our Price: $15.99
Savings: $4.00
|
|
|
Kit includes: 2 climbing pins, 2 climbing pin springs, 1 safety shear pin, lubrication tube, 2 cross pins and instructions.
|
|
|
|
|
|
|
|
|
|
HI-LIFT NJC NEOPRENE JACK PROTECTOR
|
|
List Price: $39.99
Our Price: $25.95
Savings: $14.04
|
|
|
This Hi-Lift® branded neoprene jack cover offers a level of mud and dirt protection for the main lifting mechanism (running gear) of the Hi-Lift® jack while stored. It is very important to keep the Hi-Lift® lifting mechanism clean, free from dirt and mud, and well lubricated. The neoprene zip–on cover greatly reduces the amount of dirt and mud that can accumulate in the working mechanism of the Hi-Lift® while mounted on the exterior of vehicles. This helps to keep a properly lubricated Hi-Lift® protected from mud and dirt that can keep the Hi-Lift® from operating properly when needed.
|
|
|
|
|
|
|
|
|
|
HI-LIFT LR-200 LOC-RAC MOUNTING SYSTEM
|
|
List Price: $30.99
Our Price: $25.99
Savings: $5.00
|
|
|
Conveniently mounts and locks your HI-LIFT jack in your pick-up truck bed. Includes lock and suits all models.
|
|
|
|
|
|
|
|
|
|
HI-LIFT BL-250 BUMPER LIFT ATTACHMENT (3,000LB. CAP.)
|
|
List Price: $32.99
Our Price: $25.99
Savings: $7.00
|
|
|
3,000 lb capacity. Used with Hi-Lift Jack for bumpers that are slotted or have a curved surface. Manufactured of high-quality steel. Makes raising one wheel of average vehicle easy. Designed to be used with Hi-Lift Jacks only.
When used with the Hi-Lift Jack, which is not itself designed to be used on curved bumpers, the Bumper Lift makes raising one wheel of most average sized vehicles up to 2 (5 cm) above the ground an easy task.
Never attempt to lift more than one wheel at a time.
|
|
|
|
|
|
|
|
|
|
HI-LIFT JP-350 BLACK VINYL JACK PROTECTOR
|
|
List Price: $42.99
Our Price: $27.99
Savings: $15.00
|
|
|
Protects your Hi-Lift Jack from weather, mud, dirt and sand. Made of durable vinyl-coated nylon, the Jack Protector is waterproof, as well as mildew and decay resistant.
Fits 36", 42", 48" and 60" Hi-Lift Jacks.
The Jack Protector WILL work with the 4XRAC and the LOC-RAC (user will have to place holes in protector).
Soft Case Easily Stores.
Draw String Closure.
(Note: All working parts of the 60" jack are protected. However, the foot piece and 5" of steel bar are exposed.)
|
|
|
|
|
|
|
|
|
|
HI-LIFT 4X400 4XRAC MOUNTING SYSTEM
|
|
List Price: $39.99
Our Price: $31.99
Savings: $8.00
|
|
|
Although the Hi-Lift 4xRAC was designed with Jeep® owners in mind, it may be installed on any flat surface 2-1/2 wide or more. Drilling required. Kit includes: 2 mounting brackets, 2 mounting bracket caps, 2 wing nuts, 8 hex head cap screws, 8 nyloc nuts, 1 handle strap.
|
|
|
|
|
|
|
|
|
|
HI-LIFT LM-100 LIFT MATE ATTACHMENT (5,000 LB. CAP.)
|
|
List Price: $46.99
Our Price: $39.99
Savings: $7.00
|
|
|
In recent years, many vehicle changes have been made in body styles, bumper styles, larger tires and/or lift kits added, making it harder to find a place to jack up your vehicle. The Lift-Mate is designed to provide a lifting point from most wheels (instead of the bumper) when used with a Hi-Lift®, the Lift-Mate makes raising one wheel of most average-sized vehicles a quick an easy lifting task.
|
|
|
|
|
|
|
|
|
|
HI-LIFT ORB OFF-ROAD BASE
|
|
List Price: $48.99
Our Price: $39.99
Savings: $9.00
|
|
|
Use on unstable surfaces for improved jacking ability.
|
|
|
|
|
|
|
|
|
|
HI-LIFT TM-700 ADJUSTABLE TUBE MOUNT SYSTEM
|
|
List Price: $78.99
Our Price: $57.95
Savings: $21.04
|
|
|
Designed for mounting a Hi-Lift® jack to round and square tube bumpers, bull bars, roll cages, and roof racks. Allows for easy and adjustable mounting on round tube from 1” up to 3” in diameter. The large set is designed for round tube from 2-3” in diameter that will work on most vehicle bull bars and roll cages. The small set is designed for round tube from 1-2” in diameter, which works on many roof racks, and also ATV/UTV bars, bumpers and roll cages.
|
|
|
|
